Answers are grounded in this paper and cite their sources.
Heat barrier coatings (HBCs) provide thermal insulation for structures exposed to extreme temperatures. The major shortcomings of polymer-based HBCs are their high-temperature curing, low thermal stability, and inadequate mechanical performance. The present study aims to address the above issues by developing a room-temperature curable epoxy (EP)/MQ-polysiloxane (PS) blend-based heat barrier coating. The blends were prepared by varying the weight ratios of PS. Higher PS content (>20 wt %) in the blends resulted in reduced toughness. Therefore, the 80:20 EP/PS (PS-20) blend was used for composite preparation with hollow ceramic microspheres (HCM) in the ratio of 10–30 phr (parts per hundred resin). The thermal conductivity decreased with increasing HCM content in PS-20, indicating improved insulating properties. The thermal insulation properties, measured on the composite-coated mild-steel panels, indicated that the backside temperature decreased as the HCM content in the coating increased. The blend composites showed improved flexural strength with composite coating. Further, regardless of coating type, the flexural strength increased after the first thermal cycle, then decreased with subsequent cycles. A formulation containing 20 phr HCM provided the best trade-off between thermal insulation, mechanical integrity, and hydrophobicity, reducing thermal conductivity by ∼24% while maintaining flexural strength after three thermal cycles. The developed system offers a lightweight, thermally insulating, and water-repellent coating suitable for high-temperature and harsh-environment conditions.
No takes yet. Share an insight, caveat, or question.
Naik et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: