Answers are grounded in this paper and cite their sources.
The electromagnetic fields which drive a radio-frequency induction plasma are both modeled and measured. The plasma source consists of a planar, square coil separated from a low pressure plasma chamber by a 2.54-cm-thick quartz window. A small loop antenna, which is sealed in a pyrex tube, is immersed in the discharge to determine the magnitude and direction of the rf magnetic field. The measured B field is primarily radial and axial. Typical rf field strengths vary from 2 to 7 G for rf powers of 0.1–1 kW. The radial B field decays exponentially in the axial direction. The skin depth of the electromagnetic field is 1.6–3.6 cm which is consistent with Langmuir probe measured ion densities (typically 3×1011 cm−3) in argon. Invoking Maxwell’s equations to deduce the rf electric field from the measured B field, we find the E field to be primarily azimuthal. Peak field strengths increase from 100 V/m at 100 W to 200 V/m at 600 W where they saturate for higher powers. Finally, we present a 3D finite element solution for the fields produced by this plasma source which employs a cold, collisionless plasma model to relate the relative plasma permittivity εr to the electron plasma frequency, ωpe, using εr=1−(ωpe/ω)2. The measured fields support this numerical solution.
No takes yet. Share an insight, caveat, or question.
Hopwood et al. (1993) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: