Answers are grounded in this paper and cite their sources.
The micro-structure, residual stresses, and micro-distortions generated near the surface in the AA6061-B 4 C metal matrix composite by glass-bead blasting are investigated and compared with those of the bulk. In contrast to the bulk, the sublayer is under compression and contains an extremely low density of B 4 C and a high density of dislocations. Corrosion behaviour was studied in H 3 BO 3 after immersion at the OCP and after accelerated tests. In the sublayer, initial rapid oxidation (formation of a homogeneous oxide film) is followed by slow oxidation (average corrosion rate: 2 µm/year); the oxidation front moves parallel to the surface. In the bulk, oxidation takes place along preferential paths defined by the distribution of B 4 C. The driving force is the galvanic coupling between B 4 C and the matrix. Once corrosion proceeds, corrosion products (oxidation of the sublayer) become weakly adherent, peeling off locally. The bulk is then directly exposed to the solution, promoting corrosion.
No takes yet. Share an insight, caveat, or question.
Erazmus-Vignal et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: