Answers are grounded in this paper and cite their sources.
The discharge of electricity from hot metals has been the subject of a great number of researches by different authors. The metal chiefly used in these experiments has been platinum, on account of its high melting-point, its stability in air, and the ease with which it can he obtained in a state of purity. In the present experiments calcium was chosen for investigation because of its strong electropositive character. Since this implies a great attraction for positive electricity, it would be expected that the negative corpuscles would escape more readily from calcium than from platinum. It should, therefore, be possible to obtain a measurable “negative leak” from calcium at a much lower temperature than from platinum or other less electropositive metal. The first method of experimenting employed consisted in measuring the saturation current from an electrically heated calcium wire to a surrounding electrode, both being placed in a vacuum, but it was found to be impossible to get a clean surface of calcium in this way, for the metal combines with the oxygen, nitrogen, and water vapour in the air, and becomes more or less covered with a coating of calcium compounds before the apparatus can be fitted up. Another difficulty was soon discovered. When the wire was heated to above a dull red heat, the vapour pressure of the metal was sufficient for it to volatilize and condense on the colder walls of the tube. Thus the wire got thinner at its hottest point, and, consequently, the temperature there rose, and the sublimation increased, until in a few seconds the wire had broken through.
No takes yet. Share an insight, caveat, or question.
Frank Horton (1908) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: