Answers are grounded in this paper and cite their sources.
This study presents the tensile strength of 10 1 0 MPa with the total elongation to fracture of 1 3 % in an A2024 aluminum alloy. The alloy was solution - treated and processed by high - pressure torsion (HPT) under 6 GPa for 10 turns at room temperature to refine the grain size to ~ 130 nm. A micro tensile specimen with gauge dimensions of 50 µ m in length , 20 µ m in width and 15 µ m in thickness was fabricated by focused ion beam at a position 2 mm away from the center of the HPT- processed disk. The high - strength with the ductility was achieved because (i) the micro tensile specimen minimize d larger inclusions which may lead to a premature fracture due to stress concentration, (ii) the ultrafine - grained structure produced by HPT process ing enhance d the strain rate sensitivity due to lower activation volume , and (iii) the reduction of pore density due to application of high pressure by HPT process ing . This study thus demonstrate s that the A2024 alloy has a potential to be high ly strengthened with the tensile strength more than 1 GPa and with ductility when the alloys are processed by severe plastic deformation under high pressure.
No takes yet. Share an insight, caveat, or question.
A 2025 study studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: