Answers are grounded in this paper and cite their sources.
The strong (>20 nm) wavelength detuning technique has been demonstrated to enhance the modulation speed and high-temperature characteristics (at 85 °C), as well as lower the required driving current density performance of oxide-relief 850-nm vertical-cavity surface-emitting lasers (VCSELs) for >40 Gbit/s operation. By increasing the wavelength detuning from 15 to 20 nm, a significant improvement in the electrical-to-optical (E-O) bandwidth (20 to 27 GHz) of the VCSEL can be observed. This detuning design (~20 nm) is incorporated along with a Zn-diffusion structure into our oxide-relief VCSEL with a miniaturized oxide-relief aperture (~3 μm). Highly single-mode, high-speed (26 GHz) operation, and moderate differential resistance (100 Ω) values can be simultaneously achieved. In addition, it is found that devices with a further larger detuning wavelength (>20 nm) and enlarged oxide-relief apertures (~8 μm) can sustain the same maximum E-O bandwidth (26 GHz) as that of a miniaturized (~3 μm) VCSEL, resulting in the lower driving current density (8 versus 18.8 kA/cm2) required for high-speed performance. Excellent transmission performance, which includes an extremely low energy-to-data rate ratio (EDR: 228 fJ/bit; over 100 m OM4 fiber) and record-low driving-current density (8 kA/cm2; 3.5 mA) has been successfully achieved for 41 Gbit/s error-free transmission for these VCSELs.
No takes yet. Share an insight, caveat, or question.
Chi et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: