Answers are grounded in this paper and cite their sources.
Patterned etching of GaN films was achieved with laser-induced thermal decomposition. High-energy laser pulses are used to locally heat the film above 900 °C, causing rapid nitrogen effusion. Excess gallium is then removed by conventional etching. At exposures of 0.4 J/cm2 with 355 nm light, etch rates of 50–70 nm per pulse were obtained. Illumination with an interference grating was used to produce trenches as narrow as 100 nm.
No takes yet. Share an insight, caveat, or question.
Kelly et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: