Answers are grounded in this paper and cite their sources.
A high-power photoconductive semiconductor switch (PCSS) working in linear mode can be used for RF generation by modulating the illuminating light. Such a PCSS constructed of a semi-insulating 6H silicon carbide (6H-SiC) substrate and its characterization under a high electric field is presented. The PCSS is of a vertical structure, with one hollow/transparent electrode to let through the laser light and the other highly reflective to increase light absorption. First, to optimize the high-voltage withstanding, the factors affecting the field enhancement, such as substrate thickness, electrode profiles, and encapsulating materials, are discussed. Then, the PCSS is assembled and tested, and the 0.8-mm-thick 6H-SiC PCSS is able to work with electric fields up to 225 kV/cm and the power capacity up to 10.6 MW without failure when triggered by a Nd:YAG laser (532-nm, 17-ns full wavelength at half maximum). By varying the optical energy from 3 to 31.9 mJ, the minimum conducting resistance and the peak photocurrent of the PCSS are obtained. The PCSS fails with further increasing voltage, and the cause of the failure was identified to be a bulk breakdown. The result shows that the PCSS can work linearly and it is possible to be used in high-power compact RF generation.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: