Answers are grounded in this paper and cite their sources.
CF 4 ‐plasma etching of niobium and SiO x layers has been investigated in a r.f. diode reactor. Etch rates increase linearly with increasing power density and also increase with pressure. The etch rate ratio can be changed using different etch gases or operating in different plasma modes (PE or IEPE). Changing from the ion enhanced plasma etching mode (IEPE) to plasma etching mode (PE) the etch rate ratio is changing by an factor of ten. On the basis of etch rate dependences on process parameters and thermodynamic data it has been suggested the generation of flourine radicals as the rate limiting step. A general etching model has been proposed, which explains qualitavelty and quantitatively (on account of data from literature) the measured results.
No takes yet. Share an insight, caveat, or question.
Schelle et al. (1986) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: