Answers are grounded in this paper and cite their sources.
In order to scale-up high-performance YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) coated conductors, we have been investigating pulsed laser deposition (PLD) of YBCO on the "self-epitaxial" PLD-CeO/sub 2/ layer on an ion-beam-assisted deposition (IBAD)-Gd/sub 2/Zr/sub 2/O/sub 7/ (GZO) buffered Hastelloy tape. Our continuous PLD system was designed so that the laser beam scans YBCO targets during deposition and raises plural and discrete plumes (multi-plume), and the substrate was turned three times (multi-turn) around the substrate heater to enlarge its deposition area. The multi-plume and multi-turn (MPT) PLD indicated a capability to unite high rate deposition and high J/sub c/ by enlarging the deposition area under the proper condition. A 21 m long YBCO coated conductor with high end-to-end I/sub c/ of 85.0 A and J/sub c/ of 1.13 MA/cm/sup 2/ was prepared by MPT-PLD. The uniformities of the grain alignment and transport property were also achieved. Furthermore, we succeeded in deposition of a 45.8 m long YBCO layer. The I/sub c/ was as high as 182 A, that the multiplication of I/sub c/ and length reached the highest value of 8.34 kA m.
No takes yet. Share an insight, caveat, or question.
Watanabe et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: