Answers are grounded in this paper and cite their sources.
Some etching characteristics for GaAs and InP with Cl 2 gas using a reactive ion beam etching (RIBE) system have been studied. The employed etching gas was ionized by electron cyclotron resonance (ECR) at a gas pressure of about 6×10 -4 Torr; the applied microwave power was 300 W. The etch rate was measured as a function of the substrate temperature and the applied ion extraction voltage. At low temperatures, the etch rate of InP was proportional to the five halves of the extraction voltage. This agreed well with a theoretical consideration. The maximum etch rates for InP and GaAs were 2.0 and 1.2 µm/min, respectively, both at 200degC.
No takes yet. Share an insight, caveat, or question.
Tadokoro et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: