This is the authors' abstract. We don't add key points for this paper.
For the purpose of introducing a current confining structure to the GaAlAs/GaAs surface emitting (SE) laser, a circular buried heterostructure (CBH) was introduced. The selective meltback/regrowth was employed as a novel burying method of the CBH-SE laser. First, a difference of the meltback-speeds for various AI contents of GaAlAs layers was measured by observing the depth of dissolved groove. For example, the meltback speed for GaAs was 1.6 μm/s and was almost 3 times as fast as that for Ga0.7Al0.3As. Next, an edge emitting BH stripe laser was fabricated by the selective meltback/regrowth method. The nominal threshold current density of this device was almost the same as that of the DH broad contact laser (≅ 8 kA/cm2/μm). The typical threshold current of CBH-SE lasers was reduced to ∼ 80 mA with a minimum of 68 mA when the active region was~ 15 in diameter under pulsed conditions at room temperature. But one extremely low threshold device with an active region of~ 6 in diameter was realized. The threshold was 6 mA (300 K, 1 μs pulse) and 4.5 mA (77 K, CW). This means that the diffraction loss is not noticeable when the diameter is> 6 . This is also the first demonstration of a microcavity GaAlAs/GaAs surface emitting laser with a cavity of 7 μm long and 6 μm in diameter.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kinoshita et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: