Answers are grounded in this paper and cite their sources.
Ultrasonic senders with DC-biased piezoelectret films were built and characterized. The generated sound pressure of the transducers is inversely proportional to the distance from the transducer and proportional to transducer size, AC-voltage, square of the frequency, and effective d33-coefficient of the films. With polypropylene films and DC-voltages of 1000 V, effective d33-coefficients of more than 750 pC/N are obtained. For an applied signal AC-voltage of 46 Vrms, a transducer area of 1.8 cm2, and a distance of 60 mm, sound pressures exceeding 10 Pa were measured in the frequency range above 100 kHz. With stacks of 2 and 3 piezoelectret film layers, effective d33-coefficients up to 1500 pC/N and sound pressures of about 20 and 40 Pa, respectively, could be obtained at frequencies between 60 and 120 kHz. This represents, for otherwise equal parameters, an increase by about a factor of four compared to previous piezoelectret transducers.
No takes yet. Share an insight, caveat, or question.
Hillenbrand et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: