Answers are grounded in this paper and cite their sources.
A trilayered dielectric thin‐film capacitor with an A1‐A12O3‐Ta2O5 (N)‐A12O3‐A1 structure was formed by anodizing a trilayered thin‐film, A1‐Ta(N)‐A1, deposited by RF diode sputtering. During the anodization procedure, Ta migrates into the aluminum oxide layer. The effect of Ta migration on the stoichiometry of the aluminum oxide was investigated by AES/XPS analysis before and after heat treatment. The results of the analysis showed that the migrated Ta's were in metallic and oxide states. However, the majority of the migrated Ta was in the metallic state, while the majority of A1 was in an oxide state. When the sample was heat treated in air at 300°C, oxidization of A1 progressed, but Ta tended to be reduced. Therefore, when a capacitor with a thick Ta film is heat treated, tanδ increases. If the thickness of the Ta layer is chosen properly, the stoichiometry of the A1‐oxide improves, resulting in a low tanδ (tanδ = 0.0018).
No takes yet. Share an insight, caveat, or question.
Dobashi et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: