Answers are grounded in this paper and cite their sources.
Two-step cyclic etching of copper thin films was carried out using acetylacetone/O2 gases and Ar plasma. The copper film surfaces were first modified by exposing them to acetylacetone/O2 gases and the modified layers were removed via Ar-ion sputtering. The surface modification step was optimized by varying the flow rate of the acetylacetone/O2 gases and exposure time. The removal step was optimized by varying the dc-bias voltage to the substrate as well as sputtering time. The surface modification and removal of the modified layers were confirmed by X-ray photoelectron spectroscopy and energy dispersive X-ray spectroscopy. The etch per cycle was estimated to be in the range of 0.7–3.0 nm. The cyclic etching of the copper films using acetylacetone/O2 gases and Ar sputtering revealed good etch profiles with an etch slope of 70° without redepositions. It is proposed that the cyclic etching using acetylacetone/O2 gases and Ar can be a suitable method to delineate the fine patterns on copper films.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: