Conductive mesh based flexible dye-sensitized solar cells

Conductive meshes are used to replace transparent conducting oxides (TCOs), which are commonly used in electrodes of dye-sensitized solar cells (DSSCs). The TCO-less flexible working electrode could be sintered under 400–500°C. A preliminary result that open-circuit voltage (VOC)=650mV, short-circuit current density (ISC)=4.5mA∕cm2, and efficiency (ηAM1.5)=1.49% (100mW∕cm2) is obtained from the liquid-type DSSC. The incident light could be dispersed uniformly inside the electrode. Testing results of the double-counterelectrode cell indicate that the transmission of electrolyte is not the rate-determining step. The dense TiO2 layer is critical in improving the cell’s performances.