Answers are grounded in this paper and cite their sources.
• DIW, pyrolysis, and CO₂ activation for carbons with >1330 m²·g⁻¹ surface area • 3D scanning replaces rheology tests for rapid ink screening and fidelity modeling • Activation tuning balances micropore formation and carbon lattice stability • Strategy enables customizable carbon lattices from renewable precursors This study presents a manufacturing and processing route for fabricating CO 2 -activated three-dimensional porous carbon (3D-PC) materials from microcrystalline cellulose (MCC) and kraft lignin (L), leveraging direct ink writing and controlled thermal processing. Response surface methodology (RSM) was employed to optimize ink formulations based on print shape fidelity, assessed via structured-light 3D scanning in an alternative, high-throughput approach to conventional rheological testing. Printed lignocellulosic structures underwent a three-day thermal schedule under inert conditions, with extended dwell in the 100 – 260°C range to promote cross-linking of the thermolabile lignin and char formation from the cellulosic fraction. This process yielded porous carbon architectures with developed internal surface area and sufficient handling robustness for post-processing. A second RSM framework was applied to fine-tune CO 2 activation parameters, enhancing microporosity through selective carbon removal via the Boudouard reaction at defect sites. Nitrogen adsorption isotherms (−196°C) confirmed the development of micropores (< 2 nm) without significant geometric degradation, indicating controlled activation rather than unselective gasification. Cold field-emission scanning electron microscopy (CFE-SEM) revealed interconnected meso/macroporosity (> 2 nm), while atomic force microscopy (AFM) confirmed sub-nanometer surface features. This study presents an integrated approach for producing high surface-area porous carbons from simple, bio-sourced, water-compatible precursors through direct ink writing, carbonization, and CO 2 activation, supporting the scalable design of architected porous carbon materials and establishing a manufacturing framework relevant to applications such as energy storage, gas adsorption, thermal insulation, and catalysis.
No takes yet. Share an insight, caveat, or question.
Odak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: