Answers are grounded in this paper and cite their sources.
• NACA0021 is equipped with wedge-flaps (WF) for aerodynamic performance enhancement. • The optimized rotor blade with WF is applied to vertical axis wind turbine (VAWT) • The comparison of the modified VAWT with clean case was carried out. • Experimental results show that WFs can enhance the performance of straight-bladed VAWTs. Vertical-axis wind turbines (VAWTs), such as the Darrieus configuration, offer a clean renewable energy source that can reduce reliance on fossil fuels. Compared with horizontal-axis wind turbines (HAWTs), VAWTs present several advantages. However, their performance is constrained by inherent limitations, including dynamic stall, wake rotation effects, and self-starting difficulties, which hinder their commercial viability. Passive flow control techniques, such as adding a wedge flap (WF) to the trailing edge of rotor blades, offer a potential solution. This study examines the performance of straight-bladed VAWTs (SB-VAWTs) with and without optimized WFs. Rotor blades were designed, fabricated, and tested in a wind tunnel under varying wind speeds and loading conditions. Results showed that adding a WF significantly enhances the power coefficient ( C p ) across different wind speeds. Maximum C p and electrical power output increased by 11% at 5 m/s and up to 20% at 13 m/s compared to clean VAWTs. Furthermore, C p -TSR curves became flatter, indicating improved stability and reduced sensitivity to sudden wind speed changes. The WF demonstrates potential as a passive flow control device, enhancing VAWT performance while maintaining adaptability. With proper dimensioning, WFs could be integrated into new turbines or retrofitted onto existing ones, making them a promising option for renewable energy systems.
No takes yet. Share an insight, caveat, or question.
Abdalkarem et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: