Answers are grounded in this paper and cite their sources.
• IR-PiFM maps identify growth artefacts on CVD grown monolayer MoS 2 as MoO x particles. • Sacrificial Al 2 O 3 layer cleaning process removes MoS 2 surface contaminants effectively. • Thin conformal ALD seed layer (∼1.3 nm) used for high-k gate oxide on monolayer MoS 2. • Cleaned MoS 2 FETs show 10–100 × higher on-current, lower SS and lower variability. • Process is CMOS-compatible and scalable for wafer-level applications. Obstacles towards the widespread use of two-dimensional materials, including MoS 2 , are high-quality large-scale growth of low defect density monolayers. A novel surface cleaning procedure, applicable in device technology, has been developed based on the use of an ALD sacrificial layer to eliminate growth aberrations. The imperfections on MoS 2 were identified using infrared photo-induced force microscopy (IR-PiFM) as MoO x particles deposited during CVD growth process. The utility of the procedure was tested through the fabrication of top gated field effect transistors (FETs) using a bilayer stack of low temperature ALD Al 2 O 3 (LT Al 2 O 3 ) seed layer followed by HfO 2 as the gate oxide. It was observed that the cleaning process results in 1–2 orders of magnitude improvement in the on-current, with a ∼30 % reduction in subthreshold swing, along with lower device variability.
No takes yet. Share an insight, caveat, or question.
Natani et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: