Answers are grounded in this paper and cite their sources.
Experimental and simulation study demonstrates over 30% carbon dioxide reduction using Hythane in gas engines, indicating a practical route for near-term fleet decarbonization.
Engines remain central to the heavy-duty transport sector, yet meeting Europe's post-2030 CO₂ and Euro 7 emission targets requires low-disruption, rapidly deployable strategies. Natural gas infrastructure is already established in many regions, and hydrogen blending offers a route to reduce fuel carbon intensity without major hardware changes. This study evaluates methane and Hythane (methane with 20% H₂) fueling in a spark-ignition engine, supported by validated Chemkin-Pro simulations incorporating 20% exhaust gas recirculation (EGR). Experimental measurements characterized performance and emissions across loads, fuel blends and equivalence ratio (lambda, λ), while the simulation framework quantified λ- and EGR-dependent NOx formation using a global EGR-species formulation. Relative to neat methane, Hythane reduced ignition delay, improved combustion completeness, and extended the lean stability limit, without increasing cylinder pressure, confirming compatibility with hardware. With 20% EGR operation at λ ≈ 1.25 can achieve <0.2 g/kWh NOx (with aftertreatment), <0.8 g/kWh unburnt hydrocarbons, and over 30% CO₂ reduction relative to a Euro 6 diesel. These results provide new evidence that Hythane fueling, combined with existing EGR and aftertreatment systems, offers a practical, resource-efficient and minimally disruptive pathway for current gas engines to meet future emissions targets, supporting fleet decarbonization and air-quality goals.
No takes yet. Share an insight, caveat, or question.
Panesar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: