Answers are grounded in this paper and cite their sources.
Photobleaching mechanism for amorphous red phosphorus film was discussed from the XPS results obtained here and the phenomenological results reported in part I. XPS spectra of the photobleached film gave two peaks in P-2p; one peak, which appears in the as-sputtered film, is due to P-P bonding, and another peak appearing on illumination is to P-O bonding. Photobleaching observed in this experiment was found to be induced by photo oxidation. Band gap illumination excites the σ-bonding electrons forming P-P bonds. A part of the excited P-P bonds dissociates and reacts with diffusing oxygen from atmosphere to form P-O bonds. The mechanism was considered to be composed of following two stages. In the first stage, a thin layer of phosphorus oxides forms on the surface of the film. The rate of this photo oxidation is controlled by the diffusion of oxygen from atmosphere. A simple experimental relationship between the decrease of the optical film thickness (Δdop) and the illumination time (t), Δdop∝t1/2, is obtained. Although the decrease of the optical thickness is observed in this stage, the film thickness (d) remains unchanged. In the second stage, photobleaching is due to the decrease in the film thickness, which is caused by evaporation of oxide layer; the decreasing rate of d is equal to that of dop.
No takes yet. Share an insight, caveat, or question.
Kawashima et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: