This is the authors' abstract. We don't add key points for this paper.
Two-dimensional (2D) materials have attracted wide attention in condensed matter physics, nanomaterials science, and other fields due to their atomically flat surface, unique band structure, and excellent electrical and optical properties. Due to the atomic thickness, the surface structure of 2D materials is closely related to their catalytic, electric, and optoelectric properties. Accurate characterization of 2D lattice is of great importance for clarifying the relationship between the properties and structures of 2D materials. As a non-destructive mode based on atomic force microscopy (AFM), friction force microscopy (FFM) can visualize the lattice structure of 2D materials under atmospheric conditions. Although there have already been a series of reports on FFM imaging of 2D material lattice, such experiments are still challenging. For example, the FFM lattice images of 2D materials suffer from obvious distortion and low signal-to-noise ratio. The reported attempts by FFM are mainly limited to 2D materials such as graphene and MoS2. Whether this technique applies to other 2D materials (such as 2D mineral materials) is not clear. In addition, the relationship between the measurement parameters of FFM and imaging quality has not been deeply explored, which limits the wide application of FFM. Therefore, clarifying the internal relationship between the experimental parameters and the lattice imaging, and developing a robust and reliable lattice characterization method are urgent issues in the field. Here, taking the freshly exfoliated highly oriented pyrolytic graphite as an example, we systematically investigate the key factors affecting the high-resolution imaging of FFM such as spring constant, normal force, and scan speed of tips. It is found that the signal-to-noise ratio of the high-resolution image is related to the spring constant of the selected probe. The proper normal force makes the probe maintain a single-point slip, and its stick-slip period is consistent with the lattice period, reflecting the accurate information of the lattice. In addition, moderate scan speed (~197 nm/s) can reduce the influence of thermal drift and partial slip and reduce measurement error as well. In order to verify the universality of this method, we measure various 2D materials with FFM. The high-resolution images without lattice distortion are obtained on chemical vapor deposition (CVD) grown MoS2, WS2, WSe2, and MoO2. The lattice constant mismatch is less than 1.3%, which is better than that of the previous report. Besides, the developed FFM method is extended to electron-sensitive 2D mineral materials. The lattice of mica, vermiculite, and montmorillonite are clearly imaged with a lattice constant error lower than 2.3%. We also show that the effect of sample thickness and electrostatic force from the surface can be eliminated by applying proper pull-off force. All in all, the key factors affecting the FFM image are systematically investigated in this work. A robust FFM approach is developed to obtain accurate structure information of 2D materials. The universality of the method is verified in both CVD-grown 2D materials and exfoliated 2D mineral materials. We believe this work can promote the application of HR-FFM in lattice imaging of 2D materials at ambient conditions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: