Answers are grounded in this paper and cite their sources.
This report deals with the development of an evacuated, load-bearing powder insulation with a thermal conductivity of less than 10 mW/m K at temperatures between 300 and 400/sup 0/C. The solution of the problem is approached in three steps: selection of an appropriate opacifier, allowance for higher residual gas pressure because of long term stability reasons, and preparation of load-bearing insulation plates from a mixture of fumed Silica with opacifiers and glass fibers. The low total thermal conductivity of the pressed plates is achieved mainly from a reduction of the solid conduction contribution using compacted powders of high porosity while maintaining high integral extinction coefficients.
No takes yet. Share an insight, caveat, or question.
Harald Reiss (1983) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: