Answers are grounded in this paper and cite their sources.
Experimental study demonstrates size-dependent shear and bending performance in fiber-reinforced high-strength concrete beams, indicating fibers can match conventional stirrups.
Beams of high-strength concrete (fcc up to 90 MPa) were tested in shear and bending. Various types of fiber (metallic and nonmetallic) were added to the concrete matrix to up to 1% per volume concrete. Also, four different beam depths were investigated. The efficiency of fibers depends on the governing load-carrying mechanisms, which may vary for different beam dimensions. The chosen steel fibers did not improve the capacity of the 250 mm deep beams as they did for some of the 300 mm beams. They enhanced the toughness in the 500 mm beams, but were not enough for the 700 mm beams. Also, a fiber cocktail may prove more effective than using a single type of fiber. The chosen steel fibers are competitive with conventional stirrups, according to this study. A nonlinear truss model is devised to predict the load-carrying capacity of the beams. The model gave good predictions for beams without stirrups and depths up to 500 mm.
No takes yet. Share an insight, caveat, or question.
Keivan Noghabai (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: