Answers are grounded in this paper and cite their sources.
The main aim of this research is to decrease the amount of AlCl3content that is very corrosive and hazardous in the catalytic system, required for the α‐olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl3on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl3and TiCl4onto Al2O3, SiO2, and mixed supports, that is, Al2O3/FeCl3and SiO2/FeCl3. It was found that silica and alumina‐based catalysts had higher catalytic activities compared to support free AlCl3; however, this enhancement for silica‐based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al2O3and SiO2, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV40and KV100). The viscosity index (VI) values, derived from KV40and KV100, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by1H‐NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three‐substituted vinylene (2Vn, 3Vn) structures.
No takes yet. Share an insight, caveat, or question.
Dehghani et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: