Answers are grounded in this paper and cite their sources.
The state of a gold (Au)‐contaminated silicon (Si) surface dipped in an aqueous solution, with a standard Au solution, was investigated using the alternating current surface photovoltage (AC SPV) method [1, 2]. On a Au‐contaminated n‐type Si wafer surface, frequency‐dependent AC SPV was observed and it was shown that the n‐type Si surface was in a depleted or weakly inverted state. The cutoff frequency was found from the AC SPV frequency dependence curve of the Au‐contaminated n‐type Si wafer and an analysis of the Si surface potential was performed. With those results, the band diagram of the Au/n‐type Si Schottky contact was found and a Schottky barrier height ΦB was calculated as 0.73 to 0.76 eV. This value is close to the reported value ΦB=0.79 eV and supports the formation of a Au/n‐type Si Schottky barrier. From these results, a model for AC SPV occurrence is proposed in which the n‐type Si surface is weakly inverted with the formation of a Au/n‐type Si Schottky barrier. Meanwhile, in a Au‐contaminated p‐type Si wafer, the measured voltage was the noise level of the measurement device and indicates a low surface potential.
No takes yet. Share an insight, caveat, or question.
Omori et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: