This is the authors' abstract. We don't add key points for this paper.
The combination of MoO3‐doped 4,4‐N,N‐bis [N‐1‐naphthyl‐N‐phenyl‐amino]biphenyl (NPB:MoO3) and 4,4′‐N,N′‐dicarbazole‐biphenyl (CBP:MoO3) was used to enhance the hole conduction in organic light‐emitting diodes (OLEDs). It is found that the OLED using NPB:MoO3 10 nm/CBP:MoO3 5 nm showed a much increased current density than the one using NPB:MoO3 5 nm/CBP:MoO3 5 nm at a given voltage larger than 4 V, mainly because the hole transport barrier across the p‐doped heterojunction in the former device became smaller than that in the latter device with the driving voltage increasing, despite the fact that the 10‐nm NPB:MoO3 in the former device caused more Ohmic loss than the 5‐nm one in the latter device. As a result of the higher conductivity of NPB:MoO3 than that of CBP:MoO3, the OLED using the combination of 15‐nm NPB:MoO3 and 5‐nm CBP:MoO3 showed significantly increased performance than the one using the single 20‐nm CBP:MoO3. We provide a useful way of advancing the OLEDs toward the practical applications in general lighting and flat‐panel displays.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: