Answers are grounded in this paper and cite their sources.
Highly oriented <111> and <110> β‐ SiC films were prepared on Si (100) single crystal substrates by laser chemical vapor deposition using a diode laser (wavelength = 808 nm) and HMDS ( Si ( CH 3 ) 3 – Si ( CH 3 ) 3 ) as a precursor. The effects of laser power ( P L ), total pressure ( P tot ), and deposition temperature ( T dep ) on the orientation, microstructure, and deposition rate ( R dep ) were investigated. The orientation of the β‐ SiC films changed from <111> to random to <110> with increasing P L and P tot . The <111>‐, randomly, and <110>‐oriented β‐ SiC films exhibited dense, cauliflower‐like, and cone‐like microstructures, respectively. Stacking faults were observed in the <111>‐ and <110>‐oriented films, and aligned parallel to the (111) plane in the <111>‐oriented film, whereas they were perpendicular to the (110) plane in the <110>‐oriented film. The highest R dep of the <111>‐oriented β‐ SiC film was 200 μm/h at P tot = 200 Pa and T dep = 1420 K, whereas that of the <110>‐oriented film was 3600 μm/h at P tot = 600 Pa and T dep = 1605 K.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: