Answers are grounded in this paper and cite their sources.
Atomic layer deposition (ALD) can be used for wafer-scale synthesis of 2D materials. In this paper, a novel, reliable, secure, low-cost, and high-efficiency process for the fabrication of MoS 2 is introduced and investigated. The resulting 2D materials show high carrier-mobility as well as excellent electrical uniformity. Using molybdenum pentachloride (MoCl 5 ) and hexamethyldisilathiane (HMDST) as ALD precursors, thickness-controlled MoS 2 films are uniformly deposited on a 50 mm sapphire and a 100 mm silica substrate. This is done with a high growth-rate (up to 0.90 Å/cycle). Large-scale top-gated FET arrays are fabricated using the films, with a room-temperature mobility of 0.56 cm 2 /(V·s) and a high on/off current ratio of 10 6 . Excellent electrical uniformity is observed in the whole sapphire wafer. Additionally, logical circuits, including inverters, NAND, AND, NOR, and OR gates, are realized successfully with a high-k HfO 2 dielectric layer. Our inverters exhibit a fast response frequency of 50 Hz and a DC-voltage gain of 4 at V DD = 4 V. These results indicate that the new method has the potential to synthesize high quality MoS 2 films on a large-scale, with hypo-toxicity and enhanced efficiency, which can facilitate a broader range of applications in the future.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: