Answers are grounded in this paper and cite their sources.
The industrial importance of aerobic microbial processes carried out in large, stirred tanks has placed new emphasis on the problems of oxygen transfer from the gas to the liquid phase. Because oxygen is with difficulty soluble in water, the rate of its solution during the course of a fermentation is often the principal factor affecting the yield of cells or cell products. The physical factors which affect the rate solution of oxygen in aqueous systems have been studied thoroughly and have been reviewed by Finn (1954). In general, it appears that high rates of oxygen transfer are attained by creating large interfacial areas between the gas and liquid phases. With modern agitationaeration equipment, this is usually achieved by sparging or agitation or a combination of the two techniques. The methods used to create a large interfacial area between gas and liquid can be compared to methods which are used to prepare colloids; these can be broadly classified as either dispersion or condensation methods. All of the conventional aeration practices correspond to the dispersion techniques in which large volumes of air are mechanically broken up or dispersed to form small bubbles. A radically different method for generating fine oxygen bubbles involves the electrolytic cleavage of water into molecular oxygen and the subsequent aggregation or "condensation" of the molecules. The advantages which could accrue from the use of electrolysis as an aeration technique prompted the present investigation. A major goal was to find out if electrolysis would satisfy the oxygen demand of a submerged culture of aerobic microorganisms; the criterion of success selected was growth equal to that of aerated control cultures.
No takes yet. Share an insight, caveat, or question.
Sadoff et al. (1956) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: