Answers are grounded in this paper and cite their sources.
For the bonding of the lightweight composite parts, it is desired to apply electrically conductive adhesive to maintain the ability to shield electromagnetic interference. Among various solvent-based adhesives, there is a new group of thermoplastic hot melt adhesives that are easy to use, solidify quickly, and are environment-friendly. To make them electrically conductive, a copolyamide-based hot melt adhesive was mixed with 5 and 10 wt% of carbon nanotubes using a melt-blending process. Well-dispersed nanotubes, observed by a high-resolution scanning microscope, led to the formation of a percolated network at both concentrations. It resulted in the electrical conductivity of 3.38 S/m achieved for 10 wt% with a bonding strength of 4.8 MPa examined by a lap shear test. Compared to neat copolyamide, Young's modulus increased up to 0.6 GPa and tensile strength up to 30.4 MPa. The carbon nanotubes improved the thermal stability of 20 °C and shifted the glass transition of 10 °C to a higher value. The very low viscosity of the neat adhesive increased about 5-6 orders of magnitude at both concentrations, even at elevated temperatures. With a simultaneous growth in storage and loss modulus this indicates the strong interactions between polymer and carbon nanotubes.
No takes yet. Share an insight, caveat, or question.
Latko‐Durałek et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: