Answers are grounded in this paper and cite their sources.
A non-destructive inspection of conductive resin lattice structures fabricated via additive manufacturing was conducted by utilizing changes in electrical resistance. Because of the complex geometry of lattice structures, visually identifying internal damage locations in materials is difficult. In this study, a low-cost and rapid non-destructive inspection method was developed by elucidating the relationship between temperature distribution changes on the surface of a structure when a current is applied and the damage locations. Thermal conduction analysis using the finite-element method was performed to calculate the temperature distribution of multiple lattice-structure models with varying defect locations when a current was applied. The difference in temperature distribution compared with defect-free models was then analyzed to identify temperature variations caused by defect locations. Furthermore, the temperature distribution was measured for lattice structures fabricated using a 3D printer when a current was applied, and the defect locations were identified by comparing these measurements with the analysis results. Additionally, a multi-class classification model using a convolutional neural network was developed. This machine learning model takes the measured temperature-difference distribution maps as input and outputs the probability distribution of defects within the structure. This study demonstrated the feasibility of estimating damage location in conductive resin lattice structures.
No takes yet. Share an insight, caveat, or question.
Habuchi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: