Answers are grounded in this paper and cite their sources.
A great deal of work has been done over the past several years toward the development of lasers with integrated spot-size converters, for better coupling directly to flat cleaved fiber or better alignment tolerance in lensed systems. Many of the techniques, such as butt-coupling or lateral-taper-vertical-shift, require etch-and-regrowth over the active region and as such are not applicable directly to Al-containing lasers. In this letter, we demonstrate a simple method to achieve narrow (15∘ × 15∘) far fields in Al-containing devices with a moderate degradation of dc, dynamic and thermal characteristics. At room temperature, uncoated 300-μm-long devices have thresholds of about 18 mA and slope efficiencies of about 0.24 W/A, with 27% power coupled directly into flat cleaved fiber compared to~10% for a conventional ($>$30∘far field) device. Comparison between calculated and measured far fields versus ridge width and number of quantum wells gives design curve information for optimizing far field performance.
No takes yet. Share an insight, caveat, or question.
Klotzkin et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: