Answers are grounded in this paper and cite their sources.
The effect of stress transfer‐limited swelling in the surface region on the hydroxylation of styrene–butadiene–styrene block copolymers in the bulk state was investigated. Films of the copolymer were allowed to react with peracetic acid to effect epoxidation and simultaneously with acetic acid and water to cleave the epoxy rings. By infrared spectroscopy it was observed that the hydroxyl content of the films decreased with increasing film thickness and the epoxy content increased commensurately. This was attributed to the presence of a lag between the advancing diffusion fronts for the epoxide groups and for the cleavage agents. This lag increases with increasing thickness due to the presence of stress‐transfer mechanisms which act to reduce the degree of swelling in the surface region and which are more effective in thicker films. The hydroxyl content increased exponentially with time, giving rise to the observation of significant induction time before there was any infrared evidence of hydroxyl formation. This resulted from the relief of part of the compressive stress in the surface region by the reaction process, which in turn increased the permeation rate of peracid.
No takes yet. Share an insight, caveat, or question.
Sefton et al. (1976) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: