This is the authors' abstract. We don't add key points for this paper.
The use of electrogenerated chemiluminescence (ECL) at microelectrodes as a light source for scanning optical microscopy is demonstrated. Cone-shaped microelectrodes were constructed by flame etching carbon fibers to a fine point. ECL generated in solution at such electrodes was forced to the apex of the conducting surface by using high-frequency (20-kHz) potential pulses and high concentrations of ECL reagents in the solution. ECL arose from the reaction of 9,10-diphenylanthracene radical cation with the radical anion of benzonitrile, the solvent. The electrode/light source was raster-scanned a finite distance above the sample surface, and images were generated with standard scanning probe software by collecting the transmitted light with a microscope objective. These images compared favorably to optical images of the same sample. A resolution of approximately 600 nm was achieved with this arrangement even though a feedback loop was not employed to control the tip distance from the sample. The source was sufficiently bright (1.82 pW) that well-defined transmittance spectra could be obtained at individual locations on the sample.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Maus et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: