Answers are grounded in this paper and cite their sources.
Cylindrical microdischarge devices, 50-150 μm in diameter and fabricated in Ni-polyimide-Cu or Ni foil structures, have been operated with Ni or Cu screens serving as the anode and/or cathode. As compared with annular anode (open bore) designs, the installation of at least one screen electrode has the effect of lowering the device operating voltage by as much as 30% while raising the electron temperature of the plasma. As a result, microdischarge devices 50 μm in diameter operate at voltages below 95 V at a Ne gas pressure of 700 torr, exhibit hollow cathode operation at gas pressures beyond 300 torr (or at least a factor of three higher than those observed previously), and the power output of a device with an anode screen operating at 300 torr is double that of its no-screen counterpart. Screen electrodes also stabilize the ignition characteristics of arrays and extend device lifetimes.
No takes yet. Share an insight, caveat, or question.
Park et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: