Answers are grounded in this paper and cite their sources.
Ignition delay times of N 2 O/CH 4 /O 2 /Ar mixtures with varying N 2 O mixing ratios (N 2 O/CH 4 mole blending ratio = 0:100, 30:70, 50:50, and 70:30) were measured behind reflected shock waves at pressures of 1.2–16 atm, equivalence ratios of 0.5–2.0, and temperatures of 1220–2336 K. At currently investigated conditions, the reactivity of methane is significantly promoted by N 2 O addition, resulting in an obvious reduction of the ignition delay time, and this effect becomes more pronounced at the fuel-rich condition and high pressure. However, N 2 O addition only results in a slight reduction in the global activation energy. To eliminate the effect of different hydrocarbon mechanisms, a widely accepted kinetic mechanism, Aramco Mech 1.3, is used to combine with three available NO x submodels (Gersen et al., Konnov, and Mathieu et al.) and simulate the measured ignition delay times. Generally, the three assembled models give a similar prediction performance and agree well with the experimental data for a low level of N 2 O addition, but they exhibit a discrepancy for a high level of N 2 O addition. Sensitivity analysis and radical pool analysis are conducted to interpret the kinetic effect of N 2 O addition on methane ignition chemistry. Results indicate that the promoting effect of N 2 O addition on methane ignition is mainly attributed to the contribution of the following three reactions: N 2 O + M = N 2 + O • • + M, N 2 O + H • = N 2 + • OH, and N 2 O + • CH 3 = CH 3 O • + N 2, which can significantly increase the concentration of the radical pool and accelerate the peak of the radical pool.
No takes yet. Share an insight, caveat, or question.
Deng et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: