Answers are grounded in this paper and cite their sources.
The modular multilevel converter (MMC) has become popular for medium-voltage applications. During MMC operation, unavoidable circulating currents flow through its arms and cause extra losses in the converter system. To generate a reference for circulating current, different current injection methods to control the circulating current have been reported. The conventional current injection techniques used so far relies on a mathematical model that excludes the effect of arm inductor voltages in its design. For high-voltage applications with many submodules (SMs), the above exclusion does not make much difference. But for medium-voltage applications with few SMs, the applied arm inductor voltages may be significant for a given dc-link voltage. In this article, inductor voltages are included in the proposed circulating current model, and a new reference for circulating current is obtained resulting in reduced circulating current through MMC arms. The proposed method is analyzed in detail on both seven-level and nine-level three-phase MMC, where advantages of the 2N+ 1 level phase disposition pulsewidth modulation (PD-PWM) scheme are retained. The simulation study is carried out in PLECS blockset to show the reduction in the rms magnitude of circulating current. The validation of the proposed technique in a lab-scale hardware prototype shows the effectiveness of the proposed method.
No takes yet. Share an insight, caveat, or question.
Chakraborty et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: