Answers are grounded in this paper and cite their sources.
Experimental study demonstrates layer thickness dictates carrier density in AlGaN/GaN heterostructures, indicating spontaneous polarization controls two-dimensional gas formation.
The influence of AlGaN and GaN cap layer thickness on Hall sheet carrier density and mobility was investigated for Al0.32Ga0.68N/GaN and GaN/Al0.32Ga0.68N/GaN heterostructures deposited on sapphire substrates. The sheet carrier density was found to increase and saturate with the AlGaN layer thickness, while for the GaN-capped structures it decreased and saturated with the GaN cap layer thickness. A relatively close fit was achieved between the measured data and two-dimensional electron gas densities predicted from simulations of the band diagrams. The simulations also indicated the presence of a two-dimensional hole gas at the upper interface of GaN/AlGaN/GaN structures with sufficiently thick GaN cap layers. A surface Fermi-level pinning position of 1.7 eV for AlGaN and 0.9–1.0 eV for GaN, and an interface polarization charge density of 1.6×1013–1.7×1013 cm−2, were extracted from the simulations.
No takes yet. Share an insight, caveat, or question.
Heikman et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: