This is the authors' abstract. We don't add key points for this paper.
A test apparatus has been designed and built for the investigation of cabled conductors subjected to transverse load. The apparatus permits measurement of compressive stress on a loaded multistage flat cable when a transport current is applied to one of its constituent subcables. With the apparatus, the critical-current behavior of a solder-filled Nb/sub 3/Sn cable made by the external diffusion method exposed to transverse loads up to 165 MPa, was investigated. A field-dependent degradation of the critical current was found. The effect is completely reversible up to about 100 MPa. Solder-filled cables as used in large-current applications are less sensitive to transverse compressive stress than single wires. A 150 MPa compressive load on the SULTAN cable, for example, degrades the critical current by 31% at 11 T. This is still a high enough value in view of the large transverse compressive stress acting on conductors required for fusion magnets.>
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Jakob et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: