Answers are grounded in this paper and cite their sources.
The features of grain growth in Os-added iron oxide films are investigated for the purpose of developing high signal-to-noise ratio (SNR) magnetic recording media. The average grain size of sputter-deposited γ-Fe2O3 films is markedly decreased by Os addition. The grains grow during the reduction process, from α-Fe2O3 to Fe3O4, and maintain the same size in subsequent oxidation, from Fe3O4 to γ-Fe2O3. Moreover, the reduction temperature decreases by 100 °C above 0.88 at. % Os addition. As a result, the grain size of γ-Fe2O3 films decreases from 84 to 35 nm as the Os content increases from 0 to over 0.88 at. %. In addition to the refining effect, an accelerating effect on the reducing reaction brings about an increase in the saturation magnetization and in the squareness ratio of γ-Fe2O3 films. Consequently, an Os-added γ-Fe2O3 thin-film disk has higher output voltage and SNR than other disks.
No takes yet. Share an insight, caveat, or question.
Ishii et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: