Answers are grounded in this paper and cite their sources.
A commercial thermotropic polyesteramide and its blends with polyarylate are the object of a slit die flow rheological study. The measurements are carried out at 280°C, a temperature slightly above the melting temperature of the thermotropic, covering a shear rate range 10−1 s−1 to 102s−1. Except in the case of the thermotropic polymer, the pressure profiles are upward parabolic which is attributed to the dependence of the viscosity on pressure. The most striking result is the observed downward curvature in pressure profiles obtained for the liquid crystalline polyesteramide: no explanation is given for this phenomenon, for the present. The elasticity of the polymer melts is expressed in terms of the exit pressure and the extrudate swell. The thermotropic polyesteramide presents negative values of both parameters (e.g. samples shrink instead of swell). Viscosity and elasticity present negative deviation from linearity when plotted against composition; this reduction in the rheological functions, caused by the addition of liquid crystal, is more pronounced at high shear rates.
No takes yet. Share an insight, caveat, or question.
Zaldua et al. (1992) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: