Answers are grounded in this paper and cite their sources.
The development of a DC magnetic field sensor based on a magnetoelectric (ME) PVDF/Metglas composite is reported. The ME sensing composite has an electromechanical resonance frequency close to 25.4 kHz, a linear response (r2= 0.997) in the 0-2 Oe DC magnetic field range, and a maximum output voltage of 112 mV (ME voltage coefficient α33of ≈30 V·cm-1·Oe-1). By incorporating a charge amplifier, an AC-RMS converter and a microcontroller with an on-chip analog-to-digital converter, the ME voltage response is not distorted, the linearity is maintained, and the ME output voltage increases to 3.3 V (α33effective= 1000 V·cm-1·Oe-1). The sensing device, including the readout electronics, has a maximum drift of 0.12 Oe with an average total drift of 0.04 Oe, with a sensitivity of 1.5 V·Oe-1(15 kV·T-1), and a 70 nT resolution. This feature is for the first time reported on a polymer-based ME device and compares favourably with a reference Hall sensor that showed a maximum drift of 0.07 Oe and an average error of 0.16 Oe, 5 V·T-1sensitivity, and 2 μT resolution. Such properties allied to the accurate measurement of the DC magnetic field (HDC) in the 0-2 Oe range make this polymer-based device very attractive for applications, such as Earth magnetic field sensing, digital compasses, navigation, and magnetic field anomaly detectors, among others.
No takes yet. Share an insight, caveat, or question.
Castro et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: