This is the authors' abstract. We don't add key points for this paper.
The electrically conductive adhesive films (ECAFs) are new materials used for large-format bonding in microelectronics packaging. However, improving its electrical and thermal conductivity, adhesion, and flexibility simultaneously has been a challenge. In this study, silver powder with different particle sizes and poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) were used to create a high-efficient multi-scale conductive bridge structure. This reduced the volume resistivity from 7.30×10 -4 Ω·cm to 3.80×10 -4 Ω·cm, with lower silver powder content. The thermal conductivity improved from 9.074 W/m·K to 9.124 W/m·K, and adhesion performance between the epoxy matrix and the metal increased from 6.85 MPa to 8.08 MPa. Furthermore, the addition of hydroxyl-functionalized polyurethane materials enhanced the toughness without significantly affecting its electrical, thermal, and adhesion properties. This study successfully prepared epoxy-based conductive adhesive films with a combination of electrical conductivity, thermal conductivity, adhesion, and flexibility, while significantly reducing costs due to the reduction in silver powder content. • Fabrication of a high-efficiency and cost-effective multiscale conductive network conducted through the usage of varying silver powder particle sizes and PEDOT/PSS. • Toughness enhancement of the conductive film through adding hydroxyl-functionalized polyurethane while maintaining good electrical and thermal conductivity and adhesion properties. • This work offers a novel strategy to manufacture conductive adhesive films with the advantages of high electrical and thermal conductivity, good adhesive performance, lightweight, flexibility, and low cost.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: