Answers are grounded in this paper and cite their sources.
Driven by the booming market of flexible wearable electrothermal and medical sensing devices, eco‐friendly flexible conductive materials are highly demanded. However, traditional flexible conductive films suffer from high brittleness and poor biodegradability, limiting their applications in sustainable wearable electrothermal systems. Herein, bio‐based composite films were fabricated via solution casting using sodium alginate/dialdehyde cellulose as the matrix and chopped carbon fibers ( CFs ) as conductive fillers. The effects of CF loading and surface modification with 3‐Aminopropyltriethoxysilane ( KH550 ) and polydopamine ( PDA ) on film performances were systematically investigated. Results show that increased CF loading simultaneously improves conductivity and mechanical properties; the 15 wt% CF film achieves optimal conductive and electrothermal performance. All films exhibit stable electrical performance under cyclic bending, with resistance variation below 5% after 60 bending cycles. The two modification strategies exhibit markedly different effects: 1.2 wt% KH550 modification enhances interfacial compatibility, conductivity, and strength while endowing hydrophobicity, whereas 2 g/L PDA treatment improves tensile strength and hydrophilicity yet may trigger CF agglomeration and damage conductive networks. The optimal condition is 15 wt% CF coupled with 1.2 wt% KH550 modification. This work clarifies the regulation of filler content and interfacial modification on multifunctional performances, providing experimental guidance for designing sustainable flexible conductive films.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: