Answers are grounded in this paper and cite their sources.
The present research extends the previous work on the lustre of doubled yarns2 to 2/140's counts and details the degree of lustre imparted by different mercerisation processes and the effect of such processes on the supposed regularisation of doubling twist. The photometric methods are improved and highly accurate, the yarn being examined in the form of pads illuminated by light whose angle of incidence varies from 0° to 60°. It will be obvious, since such pads consist of “entirely floating” threads, that the method is one capable of very extended application. For example, the lustre of raw cottons and slivers (in the form of pads of parallel hairs), single and double yarns of varying twists (whether plain, gassed or mercerised), and fabrics of different weaves (whether grey, mercerised, schreinered, calendered, and so forth) can be readily examined. Much work has already been completed in this direction and a brief account of its scope is given in Part II. of this paper. It is shown that— The lustre of a doubled yarn depends on the position of the fibres relative to the axis of the finished yarn, the maximum lustre being obtained when the fibres are parallel to the axis of the folded yarn. This condition holds for counts 2/3's to 2/140's when the doubling twist is seven-tenths (or 1/√2) times the original twist of the component singles. In all cases, with the exception of the 2/12's yarn, there is no appreciable difference between the lustre curves of doubled yarns which have been mercerised on the Sulzer and Niederlahnstein machines under different trade conditions (see pp. T169–170), a simple calculation from the curves giving an accurate measure of the lustring effect of each mercerising process. The regularity of the doubling twist in yarns (a) grey, (b) mercerised on the Sulzer, and (c) mercerised on the Niederlahnstein machines is the same. There is no indication of a tendency of either mercerising process to regularise the variations of doubling twist produced in the spinning and doubling rooms. Since variations of lustre depend on the relationship between singles and doubles twist referred to above, this conclusion is in agreement with (2). The lustre of fabrics can be satisfactorily expressed only by curves showing the degree of reflection for various angles of incidence. Examples of such curves are given for calendered and schreinered fabrics. The cause of the characteristic appearance of a schreinered fabric is discussed.
No takes yet. Share an insight, caveat, or question.
Adderley et al. (1925) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: