Answers are grounded in this paper and cite their sources.
In the thermomechanical control process (TMCP) with accelerated cooling, the effect of the combined addition of boron with a grain-refining element, niobium, vanadium or titanium, on the mechanical properties and microstructures of low-carbon steels was studied. It was found that although the single addition of boron has little effect on the steel properties, the combined niobium-boron addition conspicuously improves the strength and toughness balance. In the case of the single addition of boron, coarse Fe23(CB)6 precipitates at γ-grain boundaries after rolling, and the γ-α transformation suppressing effect by boron is remarkably weakened. Niobium addition to boron steel has the effect of suppressing the precipitation of Fe23(CB)6 and strongly retards the γ-α transformation, and hence produces a fine-grained bainitic structure. Titanium has the same effect as that of niobium, but vanadium does not. The strengthening and toughening mechanism of steels by the combined niobium-boron addition was also discussed by examining the effect of alloying elements on the recrystallization stop temperature of γ during rolling, γ-α transformation behavior and so on.
No takes yet. Share an insight, caveat, or question.
Tamehiro et al. (1986) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: