Answers are grounded in this paper and cite their sources.
We examine the influence of intragrain defects and grain boundaries on the macroscopic performance of a thin film polycrystalline silicon solar cell. In addition, we evaluate the effect of grain size inhomogeneity on the cell performance via circuit simulations. From an analytical study of charge transport in individual grains and homogeneous grain systems, we obtain the grain size and intragrain diffusion length requirements for a desired efficiency. We identify the conditions under which the grain size and the intragrain diffusion length dominate the cell characteristics. In devices with intragrain effective diffusion length L mono ⩽ 100 µ m and grain boundary recombination velocity S GB ⩽ 10 4 cm s −1 , achieving a larger grain size beyond several µ m is not crucial. The inhomogeneous distribution circuit simulations show that grain size inhomogeneity is not the main limiting factor in polycrystalline silicon solar cells. This is so even in thin polycrystalline silicon films with a broad grain size distribution such as those made with aluminum-induced crystallization at low annealing temperature. The main reason is that the optimum bias point for grains of different sizes only differ by about ∼50 mV over a fairly wide grain diameter range 0.5–50 µ m even when L mono = 100 µ m and S GB = 10 5 cm s −1 .
No takes yet. Share an insight, caveat, or question.
Abass et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: