Answers are grounded in this paper and cite their sources.
This work demonstrates how a multi-electrode array (MEA) dedicated to four-electrode bioimpedance measurements can be implemented on a complementary metal-oxide-semiconductor (CMOS) chip. As a proof of concept, an 8 × 8 pixel array along with dedicated amplifiers was designed and fabricated in the TSMC 180 nm process. Each pixel in the array contains a circular current carrying (CC) electrode that can act as a current source or sink. In order to measure a differential voltage between the pixels, each CC electrode is surrounded by a ring shaped pick up (PU) electrode. The differential voltages can be measured by an on-board instrumentation amplifier, while the currents can be measured with an on-bard transimpedance amplifier. Openings in the passivation layer exposed the aluminum top metal layer, and a metal stack of zinc, nickel and gold was deposited in an electroless plating process. The chips were then wire bonded to a ceramic package and prepared for wet experiments by encapsulating the bonding wires and pads in the photoresist SU-8. Measurements in liquids with different conductivities were performed to demonstrate the functionality of the chip.
No takes yet. Share an insight, caveat, or question.
Nøvik et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: