Answers are grounded in this paper and cite their sources.
Abstract 1, 2, 3, 5, and 7.5 wt% MWCNTs are incorporated into PS in a twin‐screw extruder at varying speeds, throughputs and extruder barrel temperatures. Increased SME at enhanced processing speeds seems to have the single largest effect in enhancing dispersion. A relative evaluation of PS/MWCNT interactions indicate an interfacial layer growth of 24% for 2 wt% MWCNT at 1100 rpm compared to 18% growth at 500 rpm. Raman analysis does not show an MWCNT peak shift but a constant increase in FWHM is observed irrespective of the MWCNT content. A significant enhancement of thermal stability occurs up to 2 wt% MWCNT loading while 1–2 wt% shows the rheological threshold. The volume resistivity decreases dramatically in a 2 wt% sample processed at 1100 rpm compared to those processed at 500 rpm. magnified image
No takes yet. Share an insight, caveat, or question.
Sathyanarayana et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: